Últimas noticias y actualizaciones

PCB Design and Manufacturing

Test a Circuit Board with a Multimeter: Easy Methods for Beginners and Engineers

Circuit boards are at the heart of nearly every electronic device, and even a minor fault can lead to performance issues or complete failure. When a PCB stops working as expected, identifying the root cause quickly is essential for both beg...

Jun 23, 2026 Leer más

PCB Design and Manufacturing

What Are Castellated Holes in PCB Design? Benefits, Applications and Manufacturing Guide

Castellated holes, also known as PTH half holes , are plated through-holes that are cut along the edge of a PCB, creating a semi-circular copper-plated opening. They are widely used in wireless modules, IoT devices, embedded systems, and co...

Jun 21, 2026 Leer más

PCB Design and Manufacturing

What Is a PCB Via? Types, Functions, and Design Guidelines

Modern electronic devices continue to become smaller, faster, and more functionally complex, placing greater demands on PCB design. While components and traces often receive most of the attention, one critical feature works quietly behind t...

Jun 17, 2026 Leer más

PCB Design and Manufacturing

What Is PCBA Testing? Methods, Process, Common Defects, and Best Practices for Reliable Electronics

PCBA testing is a critical quality assurance process used to verify that printed circuit board assemblies function correctly before they reach end users. As electronic products become increasingly sophisticated, manufacturers must implement...

Jun 17, 2026 Leer más

PCB Design and Manufacturing

How Much Does PCB Assembly Cost in 2026? Cost Breakdown, Pricing Factors, and Saving Tips

PCB assembly pricing is rarely straightforward. The final cost of a board is shaped by multiple interconnected elements—design complexity, component selection, production volume, and testing requirements—each influencing the overall budge...

Jun 16, 2026 Leer más

PCB Design and Manufacturing

PCB Staggered Edge Connector Contacts: Why Long and Short Gold Fingers Are Used

Modern electronic systems are expected to operate with near-zero tolerance for instability, especially when modules are inserted or removed during live operation. Yet behind many “plug-and-play” board-level failures lies a surprisingly su...

Jun 15, 2026 Leer más

PCB Design and Manufacturing

Server PCB Back Drilling: How to Precisely Control and Measure Stub Length

As data rates in server and AI infrastructure continue to climb toward 112Gbps and even 224Gbps, signal integrity margins are becoming increasingly unforgiving. What was once a secondary manufacturing detail is now a first-order electrical ...

Jun 12, 2026 Leer más

PCB Design and Manufacturing

PCB Outline Tolerance Guide: Is ±0.05 mm Necessary, Achievable, and Worth the Cost?

A ±0.05 mm PCB outline tolerance is achievable , but it represents the upper limit of standard PCB manufacturing capability rather than an economical production specification. Similar to a car reaching its maximum speed, it is technically p...

Jun 12, 2026 Leer más

PCB Design and Manufacturing

How to Prevent Ink Residue in Small NPTH Holes: Root Causes, Prevention Methods, and IPC Guidelines

Ink residue inside Non-Plated Through Holes (NPTH) is a common solder mask defect in PCB manufacturing, particularly in NPTH holes with diameters of ≤1.0 mm . During the solder mask process, ink can enter these holes and become trapped due...

Jun 11, 2026 Leer más

PCB Design and Manufacturing

Are ENIG and Hard Gold Nickel Layers the Same? Key Differences Explained

Are ENIG and hard gold nickel layers the same? No. This is one of the most common misunderstandings in PCB surface finishing. Although both processes use a nickel layer between copper and gold, the nickel itself is fundamentally different. ...

Jun 10, 2026 Leer más

PCB Design and Manufacturing

ENIG vs. Electroplated Gold vs. ENEPIG vs. Flash Gold: Differences, Applications, and Selection Guide

Gold-based PCB surface finishes may look similar at first glance, but their performance, reliability, and manufacturing costs can vary significantly. Choosing the wrong finish can lead to issues such as poor solderability, premature wear, b...

Jun 9, 2026 Leer más

PCB Design and Manufacturing

Through-Hole PCB vs. HDI PCB: Is the Stack-Up Design Logic Fundamentally Different?

While both through-hole PCBs and HDI (High-Density Interconnect) PCBs aim to achieve signal integrity, power integrity, manufacturability, and mechanical reliability, their stack-up design logic differs significantly due to the type of vias...

Jun 9, 2026 Leer más